They say coconut oil fixes everything from dry skin to cavities to bad credit… so I infused cannabis in it and poured it over my entire life. Coconut oil is pretty great but it’s even better when it’s got cannabis in it. It’s like The Avengers coming together with all their superpowers combined plus, it’s easy to make with the sous vide method and ultra stealthy.

3 Benefits of coconut oil
There are a few other reasons to choose coconut oil. Not only is it a rich source of metabolism-boosting medium chain fatty acids, but some of these fats have specific health benefits, including,
1. Lauric acid
Lauric acid is a medium-chain fatty acid with antimicrobial properties. If you’re a fan of cannabis topicals, using slaves or creams with a coconut oil base provides natural protection against pathogens and infection. Lauric acid also promotes balanced cholesterol levels, making it a heart-healthy fat.
2. Caprylic acid
Caprylic acid is another MCFA with anti-microbial properties. Specifically, caprylic acid is anti-fungal. Research as early as 1949 found that this fat contained a natural fungicide, which could be beneficial for both topical and oral use. The over half-century old patent cited above found that the fat could be useful in treating mycotic infections on living organisms.
3. Vitamin E
Coconut oil contains small amounts of vitamin E, which is an antioxidant that is excellent for skin and hair. While the oil itself is not the best dietary source of the vitamin, it does help the body absorb vitamin E more readily. Including more coconut oil in your diet helps ensure that your body is making the best use out of the phytonutrients that you consume on a daily basis.
Why Use Cannabis-Infused Coconut Oil?
One of the reasons why coconut oil is such a popular ingredient in cannabis-related products is that it has a surplus of fatty acids, which provides a strong binding agent for the therapeutic cannabinoids found in the marijuana plant. It’s made up of more than 80 percent saturated fat. For the sake of comparison, olive oil has only 20 percent. As a result, products made with coconut oil retain far more cannabinoids and provide more medicinal benefits. It also contains lauric acid, which can help fight harmful bacteria in the gut.

It’s very important to note, however, that when you use cannabis-infused coconut oil, you won’t feel the effects right away. Products containing the oil typically take a long time — as long as three hours — to deliver therapeutic benefits, because the body has to first digest the cannabinoids. But once it takes effect, those benefits can last for several hours.
The process of infusing cannabis into coconut oil doesn’t typically alter the flavor of a cannabis strain, nor does it alter the psychoactive effects of that strain. So, whatever type of weed you use, you need to choose the strain that will deliver the kind of effect you want to achieve — whether that’s a hybrid, sativa or indica.
The most important thing to remember when choosing a strain is to make sure it doesn’t have any bugs, fungus, mold or other impurities. If it does, infusing the cannabis with coconut oil won’t cleanse those impurities.
Different Types of Coconut Oil
There are a great many uses for coconut oil when it comes to cannabis-based edibles. You can make it into a sauce or a dressing, add it to a stew or soup, or even use it as a poultry rub before you put your chicken in the oven. It’s great for mixing into foods like fish or scrambled eggs, and you can add it to hot chocolate, tea, coffee or a smoothie.
The type of coconut oil you’ll use will depend on how much coconut flavor you want. Unrefined and cold-pressed oils are usually better for products that require either no cooking or cooking with low heat, because they deliver a strong flavor. Refined coconut oil is usually preferred for sautéing, baking and frying, and results in a lighter coconut flavor.
Here’s some quick information on some of the different types of oils that are available:
- Unrefined Coconut Oil — Also known as “virgin” coconut oil, refined oil is produced without the application of heat. It’s very high-quality, but it’s also rather expensive. It’s not only very smooth and mild, but it also tastes good enough to be eaten directly off a spoon.
- Cold-Pressed Coconut Oil — The method of producing cold-pressed coconut oil is similar to that used to produce unrefined oil, with the exception of the drying process, which requires heat. The amount of heat used, as well as the drying method, will determine how the oil tastes as well as its quality. For example, if it’s processed at a low temperature, the result will be a milder coconut flavor. If it’s processed at a higher temperature, it may taste more like toasted coconut.
- Refined Coconut Oil — Most of the coconut oil you’ll find at the market is refined. It’s less expensive than other alternatives and it delivers a lighter coconut taste. While the process used to refine the oil will remove some of its nutrients, it’s still good to use for cooking. Just make sure the labeling says “solvent-free.” If it doesn’t, don’t buy it.
How to Make Cannabis Coconut Oil
Making coconut oil-infused cannabis is a lot easier than most people think. You’ll need a stovetop or a hot plate with a double boiler and the following supplies:
- A quarter-ounce or half-ounce of cannabis
- 1 cup of coconut oil
- Cheesecloth (an 8-inch by 10-inch piece should work fine)
- Cooking twine (about three feet should work) or a clean, white shoestring that hasn’t been used
If you don’t have high-quality bud, you can still use trim or shake. You don’t want to use stems or seeds, though.
Getting Prepared
- First, lay out the cheesecloth.
- Put your weed in the middle of the cheesecloth, making sure you break up any larger buds.
- Spread out the cannabis evenly.
- Fold the opposite ends of the cheesecloth and then fold in an open end. Tuck the other remaining end into that one and roll up the cloth.
- Use the cooking twine/shoelace to tightly tie up the roll.
- Put a few inches of water into the bottom pan of the double boiler, making sure the water doesn’t touch the top of the pan. Then, set the shallow pan on top of it. Set your heat to medium to ensure a gentle boil.
- Add the coconut oil to the top pan.
- Add a cup of water when the oil is nearly melted.
- Keep heating the water/oil mix until all of the oil is melted and then add the cheesecloth. Use a spoon and press gently into the liquid.
- Cover the pan and let it cook for about 90 minutes. Make sure you check back every 30 minutes or so to flip the cheesecloth and gently stir.
- After 90 minutes, the water/oil mix should have a deep green color. Turn off the heat, take out the cheesecloth and put it in a bowl. Press with your spoon to squeeze out the oil. Add it to the oil/water mix and put in the refrigerator.
- Once the mixture cools off, the oil and water will separate. You should see water at the bottom (it will look like it’s dirty) and a green, solid oil on top. Poke a couple of holes in the solidified oil and turn it over to drain off any remaining water.
And that’s it! Now you’ll be able to use your cannabis-infused coconut oil in any way you like. Check out our other medical marijuana recipes to get the most from your coconut oil.
How to Make THC Coconut Oil
Medicated Coconut Oil
Makes 16 oz
Ingredients:
• 16 oz coconut oil
• 1/4 – 1/2 oz cannabis clippings/trim or flowers (add more or less depending on your desired potency)
Directions:
1. First you need to decarb your trim to activate the THC. You can decarb using the sous vide method or you can wrap the trim in foil and place in the oven at 310ºF for 10-18 minutes. You know it’s ready when it starts smelling like a Christmas tree.
2. Set your sous vide water bath to 85ºC (185ºF).
3. Pour the coconut oil in a large canning jar and add the warm, decarbed trim. Seal the jar and place into the water bath to sous vide for 4 hours to fully infuse.
4. After 4 hours, gently remove jar from water bath and let cool.
5. Strain out the trim and discard.
6. Keep the oil in a cool dark place or in the fridge.
*Note: The amount of cannabis coconut oil specified in this recipe is a very loose suggestion; the actual amount you use should be modified based on the strength of your coconut oil and the potency you desire. Dosing homemade edibles can be tricky, so the best way to test for potency is to start with one portion of a serving, in this case, one teaspoon, and wait one to two hours, then make an informed decision on whether to consume more. Always dose carefully and listen to your body, and never drive under the influence of cannabis.
Sorry for the absolutely rookie question – but what kind of weed is this? Can I use regular weed that I buy for smoking? Also, one cup seems like an obscene amount! Would so appreciate someone spoke to me in super layman terms! Thanks!
I made some thc coconut oil few days ago. I set it on low for about 4.5 hours. End product was decent. Taste was not very good but mixed well with some things. It took a while to hit but once it did i had a solid high for about two hours which is rare for me. I put a bout 3/4 of the final product and made some baked it into something. It pretty much put me and my friend to sleep